Step by Step Water Damage Carpet Cleaning Procedure

Step by Step Water Damage Carpet Cleaning Procedure

For homeowners, water damage carpet cleaning is one of the worst experiences. Quick and safe cleaning of the carpet in every home is crucial. However, if the carpet already smells bad, then it is probably too late. Flooded carpet cleaning must be carried out as soon as possible to increase the chances of saving the carpet.

Two Factors on Which the Carpet Damage Depends are:

  • The category of water that has damaged the carpet (clean water, grey water, or black water).
  • Time duration for which the carpet has been exposed to water.

Here is the step-by-step process for water-damaged carpet cleaning in order to save it and prolong its life.

Step 1: Assess the Source of the Flood and Know the Type of Damage

Knowing where the flood is emerging from will help to ascertain whether flooded carpet cleaning is possible or not. If it is clean water, from a leaking pipe or rainwater, the carpet can probably be saved by acting quickly and getting help from a carpet cleaning specialist in Melbourne.

However, if it is contaminated with dirty water due to sewer or toilet backflow, discarding the carpet is a better option.

Step 2: Stop the Source of Water Leakage

This step may involve something as easy as turning off a valve that is open, or alternatively, you may require professional help from a plumber.

Step 3: Remove Excess Water from the Carpet

This third step in flooded carpet cleaning involves removing excess water from the carpet. This involves the use of a series of large dry towels over the wet areas. If it is possible, you can also move the carpet to get some direct sunlight and air to reduce drying time.

Step 4: Remove the Wet Spots from the Carpet

This step involves removing the wet patches or spots on the carpet using a box cutter. In flooded carpet cleaning, this step is crucial as it helps prevent the possibility of the spread of mould and mildew.

Step 5: Air Circulation in the Room

For improved airflow across wet areas and flooded carpet drying, turn on the ceiling fans, standing fans, and the air conditioning unit at home. Open the doors and windows to let fresh air circulate in the room. Increased airflow will also help get rid of the foul and musty odour from the carpet.

Step 6: Examine the Carpet

After about 12 hours of drying, it is important to carefully inspect the carpet. This is the time when the occurrence of mould spores can happen. In that case, you may need to call a specialist.

Step 7: Make Use of a Dehumidifier

Once the carpet is dry, you can use a dehumidifier to remove any moisture that is present in the room. Running the dehumidifier helps prevent mould build-up.

Step 8: Inspect the Padding

The water saturation on the carpet may have damaged the padding underneath. A professional carpet cleaning specialist can assess your carpet padding to see if it needs to be replaced or can be restored.

Step 9: Replace the Furniture and Patch the Carpet

Once the carpet and the home space are completely dry and free from any moisture, it is time to get the carpet patched again and furniture replaced.

If you feel that water damage carpet cleaning is difficult for you, it is best to get help from a carpet cleaning specialist in Melbourne.

Toms Carpet Cleaning provide steam, dry, water-damaged carpet cleaning in Melbourne. Get an instant quote for same-day cleaning.

Read Next Blog:

How To Remove Tar Stain From Carpet

You May Also Like

Inquire Now
close slider
=