Flowers are a wonderful gift from nature. Flowers kept at home, especially white lilies, add to the freshness, lift your mood, eliminate harmful toxins, and create a sense of positivity in your home. However, as the lily flowers age, they start shedding pollen grains. The lily pollen grains can leave yellow, orange, and brown coloured stains on clothes and of course, your carpet at home. Removing pollen stains from carpets is not easy.
If pollen grains have caused stains on your carpet, you need to start the treatment for carpet stain removal immediately before letting those stains become permanent.
Equipment and Chemicals You Will Need for Carpet Stain Removal
- Sticky tape
- Vacuum cleaner
- Dry cleaning solvent (rubbing alcohol)
- Oxygen-based bleach
- White cloths
Before you Begin
- Prior to removing pollen stains by using any chemical, it is important to first test the chemical (cleaning solvent/solution) on a small unnoticeable portion of the carpet to ensure that it does not discolour it.
Step-by-Step Process to Remove Pollen Stains from Carpet
Use a vacuum to remove the pollen grain
- The first step of carpet cleaning in Melbourne is removing the pollen grain using a vacuum cleaner.
- The vacuum cleaner must be held close to the pollen so that it can be picked up using suction.
- Care must be taken not to touch the pollen grain with the vacuum nozzle.
Use sticky tape to remove any leftover pollen from the area
- Gently lay a sticky tape over the stained area on the carpet.
- Lift any pollen using the tape that the vacuum was not able to pick up.
Use a dry-cleaning solvent to blot the stain
- Apply a small amount of dry-cleaning solvent (isopropyl alcohol) to the white cloth or towel. You can even use a sponge for this purpose.
- Blot the solvent on the carpet stain from the outer edge of the stain towards the inside to prevent the stain from increasing in size for effectively removing pollen stains.
- Keep blotting with a clean area on the cloth until the entire stain is transferred to the cloth.
Air dry and vacuum
- In the last step of carpet cleaning in Melbourne, allow the carpet to air dry.
- Use a vacuum to lift the carpet fibre.
Treatment with an oxygen-based bleach
- If you still see any visible stains or dye left on the carpet, prepare a solution of oxygen-based bleach and water.
- Apply this solution for carpet stain removal directly on the stains and blot them.
- Let the oxygen-based bleach solution remain for one hour.
- Blot dry with a white cloth dipped in water.
- Continue this treatment until all the pollen colour is removed completely.
Rinse with cold water
- Once all the stain has been removed completely with this carpet stain removal method, rinse the area with cold water.
- Use a white cloth to soak any dampness.
Air dry and vacuum
- Let the carpet air dry for some time.
- Once dried completely, use a vacuum to lift the carpet fibre.
Removing pollen stains from carpets is quite tedious. If you are finding carpet stain removal difficult, it is best to hire a professional and an expert company involved in carpet cleaning in Melbourne.